AntMiner V9~4TH/s @ 0.253W/GH Bitcoin/Bitcoin Cash ASIC Miner V9

#ad
#ad
Bitmain V9 #ad - Cooling: 2x 12038 fans8. All ten 6-pin pci-e power connectors are required. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 4. Bitmain recommends the apw3++ or APW7 power supply for the AntMiner V9. Power supply sold separately - AntMiner APW3++ or APW7 Power Supply Recommended.

Power Efficiency: 0253 w/gh ±7% at the wall, 93% efficiency, with Bitmain PSU, 25°C ambient temp4. Hash rate: 4. 0 th/s ±5%2. Dimensions: 301mml*123mmW*155mmH7. Do not connect more than one PSU to the same hash board to prevent possible damage and instability. Bitcoin mining hash Rate: 4. 0th/s ±5%. Each antminer v9 requires ten 6-pin PCI-e connectors for 12V DC input must be very stable power source.

AntMiner V9~4TH/s @ 0.253W/GH Bitcoin/Bitcoin Cash ASIC Miner V9 #ad - Antminer V9 Specifications:1. Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included. The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking.

More information about Bitmain V9 #ad

AntRouter R1-LTC ~1.29MH/s ASIC Litecoin Miner with Built-in WiFi Router AntRouter R1-LTC @ 1.29MH/s

#ad
#ad
Bitmain AntRouter R1-LTC #ad - Can be configured as a WiFi client on your existing network without Ethernet. Litecoin mining Hashrate Scrypt: 1. 29mh/s ±10% asic chip type: bm1485 mining mode: Mines on any pool Power consumption: 3. 78w ±2. 9% at the wall Mining power efficiency: 2. 93 j/mh ±2. 9% wifi standard: 802. 11g/n, 2. 4ghz input current: 0

2a usb charging port voltage: 5v operating temperature: 0 - 40°C Operating humidity: 5%RH-95%RH, Must prevent condensation Product dimensions: 84. 5mml x 56. 6mmw x 29mmh weight: 148 grams q: can the antrouter be configured as a wifi client so that I don't have to connect an Ethernet cable to it? A: Yes! check out this guide: https://youtu.

AntRouter R1-LTC ~1.29MH/s ASIC Litecoin Miner with Built-in WiFi Router AntRouter R1-LTC @ 1.29MH/s #ad - Be/3acr2a3dppq compatible coins:abyadcnancariaurbelablazrblcnblzbtacnccscdgbdotemc2emdfrngamegldkiclinxltbltclunamecmoonnlgnotenvcnyanpakqtlscoresfcsongsxctipstrollttcWBBWDCXVG Litecoin mining hashrate: 1. 29mh/s ±10% faster than $900 AMD 7990 GPU. Built-in power supply Plugs directly into a power outlet.

Built-in web management - Separate host computer NOT required for mining. Can be used to mine any Scrypt-based coin on any pool.

More information about Bitmain AntRouter R1-LTC #ad


Similar products



Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s

#ad
#ad
Bitmain Antminer S9 #ad - Do not connect more than one PSU to the same hashing board! 3. Built-in web management - Separate host computer NOT required for mining. Bitcoin mining hash rate: 13. 5th/s ±5%. Can be used to mine any Scrypt-based coin on any pool. The antminer s9 requires TEN 6-pin PCI-e connectors. Power supply is not included* if you have 220v-264v power, then Bitmain recommends using the APW3++ power supply.

Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 2. Very loud! sounds like a whiny vacuum. If you have 110v-120v power standard power outlets in the us, then the following power supplies have been confirmed to work well: -Bitmain's APW5 -Two Bitmain APW3++ -EVGA's SuperNova 1600 G2 Specifications: 1.

Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s #ad - Power consumption: 1323W ±10% 3. Litecoin mining hashrate: 1. 29mh/s ±10% faster than $900 AMD 7990 GPU. Dimensions: 350mml*135mmW*158mmH 6. Bitmain recommends the APW3++ for those with 220v power. There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller.

More information about Bitmain Antminer S9 #ad


Similar products



AntMiner T9+ 10.5TH/s @ 0.136W/GH 16nm ASIC Bitcoin & Bitcoin Cash Miner

#ad
#ad
Bitmain T9+_10.5T #ad - Bitmain recommends the APW3++ when using a 220v power source. Litecoin mining hashrate: 1. 29mh/s ±10% faster than $900 AMD 7990 GPU. Most power efficient bitcoin Miner: 0098 j/gh ±7%. If using a 110v power source, we recommend purchasing the EVGA SuperNova 1600 G2. 5. The restocking fees are typically waived in the event that there is a provable failure within the first 30 days.

Each antminer t9+ requires ten 6-pin pci-e connectors for 12v dc input must be very stable power source There are three hash boards that require three 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. No host computer required. Power supply sold separately. Power consumption: 1323W ±10% Power supply not included.

AntMiner T9+ 10.5TH/s @ 0.136W/GH 16nm ASIC Bitcoin & Bitcoin Cash Miner #ad - The sound is from the hashing boards moving back and forth against the metal frame. Due to the nature of these products, there are higher than normal restocking fees typically 40%. Built-in power supply Plugs directly into a power outlet. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.

4. Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+.

More information about Bitmain T9+_10.5T #ad


Similar products



AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner

#ad
#ad
Bitmain L3+ #ad - Built-in power supply Plugs directly into a power outlet. Do not connect more than one PSU to the same hash board to prevent possible damage and instability. 3. Many people use basements or sheds, but returns due to noise will be subject to the full restocking fee. Compatible coins: Any coin based on the Scrypt algorithm.

There are many dozen coins, but the most well known is Litecoin. Can be configured as a WiFi client on your existing network without Ethernet. Built-in web management - Separate host computer NOT required for mining. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.

AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner #ad - 4. Apw3++ on a 220v outlet recommended OR EVGA SuperNova 1600 G2. Fastest litecoin or other Scrypt-based coin ASIC miner commercially available! Due to the nature of these products, there are higher than normal restocking fees typically 40%. Most power efficient bitcoin Miner: 0098 j/gh ±7%. Built-in web management portal - No separate host computer or software required.

The restocking fees are typically waived in the event that there is a provable failure within the first 30 days.

More information about Bitmain L3+ #ad


Similar products



Antminer D3 19.3 GH/s X11 ASIC Dash Miner

#ad
#ad
Bitmain Bitmain Antminer D3 19.3 GHZ @ 537 Mgz #ad - Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+. 3. Antminer aPW3++ recommended. Hash rate: 19. 3 gh/s variation of ±5% is expected. It recommends use of the APW3++ PSU with the Antminer D3. No host computer required. Power supply sold separately. Not included 4. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.

Evga supernova 1600 g2 recommended if you only have 110-120v power. Designed for reliability, stability, and longevity. Hash rate: 105th/s ±7%. Power consumption: 1450W ±7% Power supply sold separately. Easy to use web interface. Power consumption: 1200w at the wall, 93% efficiency, with Bitmain's APW3 PSU, 25°C ambient temp.

Antminer D3 19.3 GH/s X11 ASIC Dash Miner #ad - Hashing algorithm: X11 Dash and many others. Litecoin mining hashrate: 1. 29mh/s ±10% faster than $900 AMD 7990 GPU. Specifications of the antminer D3 are as follows: a Hash rate: Hash rate: 19. 3 gh/s variation of ±5% is expected b power consumption: 1200W at the wall, 93% efficiency, with Bitmain's APW3 PSU, 25°C ambient temp.

More information about Bitmain Bitmain Antminer D3 19.3 GHZ @ 537 Mgz #ad


Similar products



Electop 2 Pack 2 Pin SW PC Power Cable on/Off Push Button ATX Computer Switch Wire 45cm

#ad
#ad
Electop 2 Pin SW PC Power Cable #ad - Easy to install without any driver, plug and use. Length: 45cm. Bitcoin mining hash rate: 13. 5th/s ±5%. Built-in power supply Plugs directly into a power outlet. The product works well for mining rig. Power consumption: 1200w at the wall, 93% efficiency, with Bitmain's APW3 PSU, 25°C ambient temp. Hashing algorithm: X11 Dash and many others.

Electop 2 Pack 2 Pin SW PC Power Cable on/Off Push Button ATX Computer Switch Wire 45cm #ad - Can be configured as a WiFi client on your existing network without Ethernet. Can be used to mine any Scrypt-based coin on any pool. No host computer required. Power supply sold separately. Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+. Power consumption figures will vary with your psu's efficiency, the ambient operating temperature and the accuracy of the power meter.

One apw3++ psu can not power more than one Antminer D3. Power consumption: 800W ±10% Power supply sold separately. Evga supernova 1600 g2 recommended if you only have 110-120v power. Designed for reliability, stability, and longevity. Hash rate: 105th/s ±7%.

More information about Electop 2 Pin SW PC Power Cable #ad


Similar products



Switching Power Supply for Bitmain AntMiner L3+ S9 T9 Model Number: APW3++-12-1600-A3, Wide Voltage Design, 1200W / 1600W, 10 of 6-pin PCIe Connectors

#ad
#ad
Bitmain NA #ad - The product works well for mining rig. Excellent build quality, great for replacing the power switch cable as a Momentary reset switch cable and restart switch cable. Be sure to power on the miner only after all the PCIE connectors are connected to power supply. Built-in web management - Separate host computer NOT required for mining.

Perfect fit for a motherboard's 2-pin power switch Power SW header. Apw3++ on a 220v outlet recommended OR EVGA SuperNova 1600 G2. Fastest litecoin or other Scrypt-based coin ASIC miner commercially available! Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+. Most power efficient bitcoin Miner: 0

Switching Power Supply for Bitmain AntMiner L3+ S9 T9 Model Number: APW3++-12-1600-A3, Wide Voltage Design, 1200W / 1600W, 10 of 6-pin PCIe Connectors #ad - 098 j/gh ±7%. Can be used to mine any Scrypt-based coin on any pool. Bitcoin mining hash rate: 13. 5th/s ±5%. Built-in controller - No separate host computer required for operation. Power supply sold separately. Power consumption: 1323W ±10% Power supply not included.

More information about Bitmain NA #ad


Similar products



Tripp Lite Heavy Duty Computer Power Cord, 15A, 14AWG NEMA 5-15P to IEC-320-C13, 10-ft. P007-010

#ad
#ad
TRIPP LITE P007-010 #ad - Use tripp lite's p007-010 in server applications that require a higher rated, heavier gauge cable. Lifetime warranty: Desktop PC power cable is backed by a lifetime limited warranty. Easy to install without any driver, plug and use. Length: 45cm. This allows you to extend the length of a PC or peripheral power cord by 10 feet and convert a C14 device into a standard 5-15P.

Be sure to power on the miner only after all the PCIE connectors are connected to power supply. Reliable design: rohs compliant and is UL listed. Power consumption: 1200w at the wall, with Bitmain's APW3 PSU, 93% efficiency, 25°C ambient temp. Hashing algorithm: X11 Dash and many others. C13 to 5-15p connectors, 3 x 14 awg conductors, 15A / 125V rating.

Tripp Lite Heavy Duty Computer Power Cord, 15A, 14AWG NEMA 5-15P to IEC-320-C13, 10-ft. P007-010 #ad - Apw3++ on a 220v outlet recommended OR EVGA SuperNova 1600 G2. Fastest litecoin or other Scrypt-based coin ASIC miner commercially available! High-quality connectors: c13 to 5-15p connectors, 3 x 14 AWG conductors, 15A / 125V rating. No host computer required. Power supply sold separately. Power cable: features a c13 receptacle on one end and a standard 5-15P connector on the other end.

More information about TRIPP LITE P007-010 #ad


Similar products



ASUS B250 MINING EXPERT LGA1151 DDR4 HDMI B250 ATX Motherboard for Cryptocurrency Mining BTC with 19 PCIe Slots and USB 3.1 Gen1

#ad
#ad
ASUS Computer International Direct B250 MINING EXPERT #ad - Built-in web management portal - No separate host computer or software required. Can be configured as a WiFi client on your existing network without Ethernet. Litecoin mining hashrate: 1. 29mh/s ±10% faster than $900 AMD 7990 GPU. Maximize your mining connectivity and speed with 19x pcie slots, up to 32GB DDR4 2400 RAM, USB 3.

1 gen1 and intel Gigabit LAN. Pcie slot state detection provides instant gpu feedback for 19 PCIe slots while 5X Protection III with Safe Slot Core protects your investment, delivering higher hash rates and better mining ROI. Apw3++ on a 220v outlet recommended OR EVGA SuperNova 1600 G2. Fastest litecoin or other Scrypt-based coin ASIC miner commercially available!

ASUS B250 MINING EXPERT LGA1151 DDR4 HDMI B250 ATX Motherboard for Cryptocurrency Mining BTC with 19 PCIe Slots and USB 3.1 Gen1 #ad - Lifetime warranty: Desktop PC power cable is backed by a lifetime limited warranty. Evga supernova 1600 g2 recommended if you only have 110-120v power. Designed for reliability, stability, and longevity. Hash rate: 105th/s ±7%. Power consumption: 1450W ±7% Power supply sold separately. Easy to use web interface.

More information about ASUS Computer International Direct B250 MINING EXPERT #ad


Similar products



Tripp Lite Heavy Duty Computer Power Cord, 15A, 14AWG NEMA 5-15P to IEC-320-C13, 3-ft. P007-003

#ad
#ad
TRIPP LITE P007-003 #ad - Bitcoin mining hash rate: 13. 5th/s ±5%. Most power efficient bitcoin Miner: 0098 j/gh ±7%. Pcie slot state detection provides a real time indication of the status of each GPU in your rig. Power consumption: 1200w at the wall, 93% efficiency, with Bitmain's APW3 PSU, 25°C ambient temp. Hashing algorithm: X11 Dash and many others.

The product works well for mining rig. It recommends use of the APW3++ PSU with the Antminer D3. 10-ft. Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+. Can be configured as a WiFi client on your existing network without Ethernet. Heavy duty - 14awg: plug computers and peripherals into a standard outlet.

Tripp Lite Heavy Duty Computer Power Cord, 15A, 14AWG NEMA 5-15P to IEC-320-C13, 3-ft. P007-003 #ad - Built-in power supply Plugs directly into a power outlet. Voltage-stabilization Capacitors provides steady voltage from your power supply units to your GPUs. Do not connect more than one psu to the same hashing board! Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power.

Built-in web management portal - No separate host computer or software required. C13 to 5-15p connectors, 3 x 14 awg conductors, 15A / 125V rating. Built-in controller - No separate host computer required for operation.

More information about TRIPP LITE P007-003 #ad


Similar products