NamsoloAll deals on one page

OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip

As an Amazon Associate I earn from qualifying purchases.
#ad
#ad
OESS FCBC #ad - OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip #ad - Rubber-wrapped jaws will safely protect your glassware from scratching bad. Package include:1 pcs 2 finger adjustment lab clamp rubber-wrapped head and 1 pcs black lab stand clipPerfect for laboratory use Heavy duty 2 finger style rubber-wrapped head lab clamp with black laboratory stand clip, excellent for laboratory use.

Strong die-cast construction. Rod length*width:6. 3" *03". Maximum width of Jaw opening is 5cm.

More information about OESS FCBC #ad

American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size

#ad
#ad
American Educational 7-G15-A #ad - American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size #ad - Strong and dependable support. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. The rods are nickel plated steel and are threaded to fit the base. The rods are nickel plated steel and are threaded to fit the base. Base size: 8" length by 5" width, rod size: 3/8" diameter by 20" length. Coated with an acid resistant finish.

Strong and dependable support. Type is coated with an acid resistant finish. Available in cast iron. Made of cast iron.

More information about American Educational 7-G15-A #ad


Similar products

EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs (Opens to 90mm in Dia.) with Boss Head #ad
OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip #ad
OESS Lab Clamp 3 Prong Finger Style Laboratory 360°Swivel Type Rubber-Coated Head #ad
OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip #ad
Eisco Labs Burette/Test Tube Clamp, PVC Coated Round Jaws, Opens up to 45mm in Dia. #ad
Eisco Labs Burette/Tube Clamp, Double, High Strength Alloy - Spring Loaded Jaws - 7/8" Width Capacity, Max 16mm Dia. Rod #ad
Lab Stand Support Retort Ring Set 60mm 80mm 100mm and Lab Clamp Stand Holder #ad
OESS Lab Stand Clamp Holder Boss Head Aluminium Alloy Body Right Angle 4pcs Rods up to 18mm in Dia. #ad
OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head Large Grip Adjustment Range to 3.6" Rod Length 7" #ad
Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2 #ad


OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip

#ad
#ad
OESS #ad - 3 prong finger style rubber-Coated Head lab clampBlack lab retort stand bosshead clamp holder Strong and dependable support. Coated with an acid resistant finish. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. 3 finger clamp accepts rods up to 20 mm. Covered jaws for protection and grip. Maximum width of Jaw opening is 90mm.

OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip #ad - The rods are nickel plated steel and are threaded to fit the base. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Strong die-cast construction. Made of cast iron.

More information about OESS #ad


Similar products

American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size #ad
United Scientific SSB6X9 Support Stand with Rod, 9" Base Length x 6" Base Width #ad
OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip #ad
EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs (Opens to 90mm in Dia.) with Boss Head #ad
OESS Lab Stand Clamp Holder Boss Head Aluminium Alloy Body Right Angle 4pcs Rods up to 18mm in Dia. #ad
Laboratory Grade Metalware Set - Support Stand (8" x 5"), 12mm Dia. Rod (24" L), Cork Lined Burette Clamp with Boss Head and Retort Ring (2.5" Dia) #ad
Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2 #ad
Sciencent Retort Stand Premium Support Stand Rod 20" Acid Resistant, 8" Length x 5" Width Base Size #ad
HFS (R) Plate 8x8; Overall Height 10"; Lab Jack Scissor Stand Platform Lab Load Bearing 15kg/33lbs #ad
Dow Corning Vacuum Lubricant 5.3oz Tube #ad


EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs Opens to 90mm in Dia. with Boss Head

#ad
#ad
EISCO CH0688 #ad - Maximum width of Jaw opening is 90mm. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Coated with an acid resistant finish. Die casted alloy clamp retort, PVC coated jaws with boss head which accommodates rods up to 15 mm in diameter. Strong die-cast construction. Covered jaws for protection and grip.

EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs Opens to 90mm in Dia. with Boss Head #ad - Can mount vertical or horizontal -- rotates on clamp. Made of cast iron. Extends out approximately 5" from rod, not adjustable. 3 finger clamp accepts rods up to 20 mm. Strong and dependable support. The rods are nickel plated steel and are threaded to fit the base. Attaches to rods up to 15 mm in diameter. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length.

Jaws have a capacity of 90 mm. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

More information about EISCO CH0688 #ad


Similar products

Laboratory Grade Metalware Set - Support Stand (8" x 5"), 12mm Dia. Rod (24" L), Cork Lined Burette Clamp with Boss Head and Retort Ring (2.5" Dia) #ad
American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size #ad
StonyLab Borosilicate Glass 1000ml Heavy Wall Conical Separatory Funnel with 24/29 Joints and PTFE Stopcock - 1000ml #ad
United Scientific SSB6X9 Support Stand with Rod, 9" Base Length x 6" Base Width #ad
Mophorn Heating Mantle 1000ml Heating Mantle 350W Heating Mantle Magnetic Stirrer 0-1400 RPM Lab Heating Mantle for Liquid Heating #ad
Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2 #ad
OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip #ad
Deschem 500ml,24/40,Glass Distillation Apparatus,New Chemistry Lab Glassware Kit #ad
StonyLab Glass 500mL Heavy Wall Single Neck Flat Bottom Boiling Flask, with 24/40 Standard Taper Outer Joint - 500mL #ad
Lab Stand Support Retort Ring Set 60mm 80mm 100mm and Lab Clamp Stand Holder #ad


United Scientific SSB6X9 Support Stand with Rod, 9" Base Length x 6" Base Width

#ad
#ad
United Scientific Supplies SSB6X9 #ad - 3 finger clamp accepts rods up to 20 mm. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Maximum width of Jaw opening is 90mm. Extends out approximately 5" from rod, not adjustable. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. The rods are nickel plated steel and are threaded to fit the base.

Stamped steel bases, with black enamel finish. Made of cast iron. Strong and dependable support. Bases and Rods are also available individually. Removable, zinc plated steel rods. Attaches to rods up to 15 mm in diameter. Can mount vertical or horizontal -- rotates on clamp. United Scientific Supplies. Covered jaws for protection and grip.

United Scientific SSB6X9 Support Stand with Rod, 9" Base Length x 6" Base Width #ad - Strong die-cast construction. Coated with an acid resistant finish. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

More information about United Scientific Supplies SSB6X9 #ad


Similar products

EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs (Opens to 90mm in Dia.) with Boss Head #ad
OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip #ad
OESS Lab Clamp 3 Prong Finger Style Laboratory 360°Swivel Type Rubber-Coated Head #ad
United Scientific Supplies COBR3-FR Single Burette Clamp with Coated Jaws #ad
OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip #ad
OESS Lab Stand Clamp Holder Boss Head Aluminium Alloy Body Right Angle 4pcs Rods up to 18mm in Dia. #ad
Clamp Retort with 3 Black Sleeved Prongs and Boss Head #ad
Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2 #ad
Eisco Labs Burette/Test Tube Clamp, PVC Coated Round Jaws, Opens up to 45mm in Dia. #ad
Dinglab,500ml Chemistry Lab Glassware Kit,Glass Distilling,Distillation Apparatus,24/40 #ad


OESS Lab Clamp 3 Prong Finger Style Laboratory 360°Swivel Type Rubber-Coated Head

#ad
#ad
OESS #ad - Strong die-cast construction. Can mount vertical or horizontal -- rotates on clamp. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Strong die-cast construction. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

OESS Lab Clamp 3 Prong Finger Style Laboratory 360°Swivel Type Rubber-Coated Head #ad - Sold as 1 pcs 360 degrees swivels 3 finger lab clamp. Covered jaws for protection and grip. 3 finger clamp accepts rods up to 20 mm. Attaches to rods up to 15 mm in diameter. Extends out approximately 5" from rod, not adjustable. Maximum width of Jaw opening is 90mm. United Scientific Supplies. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length.

. Coated with an acid resistant finish. Made of cast iron. 3 prong finger style rubber-Coated Head 360°Swivel lab clamp Strong and dependable support. The rods are nickel plated steel and are threaded to fit the base. Maximum width of Jaw opening is 90mm.

More information about OESS #ad


Similar products

American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size #ad
United Scientific SSB6X9 Support Stand with Rod, 9" Base Length x 6" Base Width #ad
EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs (Opens to 90mm in Dia.) with Boss Head #ad
OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip #ad
OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip #ad
Laboratory Grade Metalware Set - Support Stand (8" x 5"), 12mm Dia. Rod (24" L), Cork Lined Burette Clamp with Boss Head and Retort Ring (2.5" Dia) #ad
American Educational Cast Iron Support Ring Stand with Acid Resistant Finish, 6" Length x 4" Width Base Size #ad
7pcs PTFE Magnetic Stirrer Mixer Stir Bar Spinbar Stirring White Color #ad
Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C #ad
Sciencent Retort Stand Premium Support Stand Rod 20" Acid Resistant, 8" Length x 5" Width Base Size #ad


Laboratory Grade Metalware Set - Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia

#ad
#ad
EISCO #ad - Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. United Scientific Supplies. 3 finger clamp accepts rods up to 20 mm. Perfect setup for a lab. Maximum width of Jaw opening is 90mm. Maximum width of Jaw opening is 90mm. Strong and dependable support. Strong die-cast construction. The rods are nickel plated steel and are threaded to fit the base.

Extends out approximately 5" from rod, not adjustable. Can mount vertical or horizontal -- rotates on clamp. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Sold as 1 pcs 360 degrees swivels 3 finger lab clamp.

Laboratory Grade Metalware Set - Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia #ad - Stainless steel rod with a powder coated base provides the perfect setup for any experiment. Blue powder coated support stand base 8" x 5. 25". Attaches to rods up to 15 mm in diameter. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Strong die-cast construction. Coated with an acid resistant finish.

More information about EISCO #ad


Similar products

EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs (Opens to 90mm in Dia.) with Boss Head #ad
StonyLab Borosilicate Glass 1000ml Heavy Wall Conical Separatory Funnel with 24/29 Joints and PTFE Stopcock - 1000ml #ad
Eisco Labs Borosilicate Burette, Straight Bore, PTFE Stopcock - 50mL Cap, 0.10mL Grad, Class A Tolerance #ad
Mophorn Heating Mantle 1000ml Heating Mantle 350W Heating Mantle Magnetic Stirrer 0-1400 RPM Lab Heating Mantle for Liquid Heating #ad
Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2 #ad
Corning Pyrex #1003, Heavy Duty, Glass Beaker Set, Griffin Low Form - 3 Sizes - 250, 400, and 600ml #ad
StonyLab Water Oil Receiver Separator with 24/40 Essential Oil Distillation Kit Lab Supply #ad
7pcs PTFE Magnetic Stirrer Mixer Stir Bar Spinbar Stirring White Color #ad
Deschem 500ml,24/40,Glass Distillation Apparatus,New Chemistry Lab Glassware Kit #ad
Eisco Labs Burette/Tube Clamp, Double, High Strength Alloy - Spring Loaded Jaws - 7/8" Width Capacity, Max 16mm Dia. Rod #ad


Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2

#ad
#ad
Soccerene #ad - Maximum width of Jaw opening is 90mm. The rods are nickel plated steel and are threaded to fit the base. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. 3 finger clamp accepts rods up to 20 mm. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2 #ad - Give our product a try by ordering today. Can mount vertical or horizontal -- rotates on clamp. Absolutely no risk. Any problem about delivery, please contact Amazon Customer Service to solve it. Guarantee:*your 100% satisfaction is our final goal, if you have any problem about the item, just feel free to contact us.

Click add to cart today to get this wonderful accessory for your science project. 100% money back guarantee - We want you to be 100% Satisfied with your purchase. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter.

More information about Soccerene #ad


Similar products

EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs (Opens to 90mm in Dia.) with Boss Head #ad
Laboratory Grade Metalware Set - Support Stand (8" x 5"), 12mm Dia. Rod (24" L), Cork Lined Burette Clamp with Boss Head and Retort Ring (2.5" Dia) #ad
Dow Corning Vacuum Lubricant 5.3oz Tube #ad
Soccerene Lab Flask Support Cork Stand 140mm / 5.5" Diam. for 1000-5000mL Flasks #ad
OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip #ad
Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C #ad
United Scientific SSB6X9 Support Stand with Rod, 9" Base Length x 6" Base Width #ad
StonyLab Glass 500ml Heavy Wall Single Neck One Neck Round Bottom Flask RBF, with 24/40 Standard Taper Outer Joint - 500ml #ad
American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size #ad
StonyLab Thermometer Inlet Adapter with 24/40 Inner Joint, 80mm Height, for Distillation Apparatus #ad


American Educational Cast Iron Support Ring Stand with Acid Resistant Finish, 6" Length x 4" Width Base Size

#ad
#ad
American Educational 7-G14 #ad - Flask support firmly holds 250-2000 mL round bottom flasks, and its outer diameter is 110 mm. The flask support is made of high quality cork, strong heat and electrical insulation, it has very good elasticity, friction resistance. Flask support is non-toxic, not easy to get fire, tasteless, small proportion, eco-friendly product.

Perfect for holding your flasks or other spherical bottom containers from failing easily. 100% money back guarantee - we want you to be 100% Satisfied with your purchase. Attaches to rods up to 15 mm in diameter. Strong die-cast construction. Perfect setup for a lab. Base size: 6" length by 4" width, rod size: 5/16" diameter by 18" length.

American Educational Cast Iron Support Ring Stand with Acid Resistant Finish, 6" Length x 4" Width Base Size #ad - Type is coated with an acid resistant finish. Coated with an acid resistant finish. Strong and dependable support. Made of cast iron. Covered jaws for protection and grip. Maximum width of Jaw opening is 90mm. Base: 6" length by 4" width; rod: 5/16" diameter by 18" length.

More information about American Educational 7-G14 #ad


Similar products

EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs (Opens to 90mm in Dia.) with Boss Head #ad
OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip #ad
OESS Lab Clamp 3 Prong Finger Style Laboratory 360°Swivel Type Rubber-Coated Head #ad
OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip #ad
American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size #ad
OESS Lab Stand Clamp Holder Boss Head Aluminium Alloy Body Right Angle 4pcs Rods up to 18mm in Dia. #ad
Eisco Labs Burette/Test Tube Clamp, PVC Coated Round Jaws, Opens up to 45mm in Dia. #ad
Dow Corning Vacuum Lubricant 5.3oz Tube #ad
7 Pcs PTFE Magnetic Stirrer Mixer Stir Bar Spinbar Stirring #ad
214F2 Karter Scientific Extension Lab Clamp 3 Prong Single Adjust 10-90mm Jaw #ad


OESS Lab Stand Clamp Holder Boss Head Aluminium Alloy Body Right Angle 4pcs Rods up to 18mm in Dia.

#ad
#ad
OESS BC4 #ad - 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Made of cast iron. Sold as 4pcs lab stand clamp Holder Boss Head Aluminium Alloy Body Right Angle Clips. The rods are nickel plated steel and are threaded to fit the base. Extends out approximately 5" from rod, not adjustable.

Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. 3 finger clamp accepts rods up to 20 mm. Strong die-cast construction. United Scientific Supplies. Package include:4pcs lab stand clamp holder Boss Head Aluminium Alloy Body Right Angle ClipsSuitable for rods up to 18mm in dia. Made of zinc alloy, and it is 90 degree with screws, it is secure and easy to control itThe clamp holder is used for holding a clamp in medical labs and research institutes.

OESS Lab Stand Clamp Holder Boss Head Aluminium Alloy Body Right Angle 4pcs Rods up to 18mm in Dia. #ad - Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Excellent laboratory iron clip, an usual clamp accessory in the lab, also suitable for home use. Moneyback gurantee, if you have any problem, your 100% satisfaction is our final goal, please feel free to contact us!.

The rods are nickel plated steel and are threaded to fit the base.

More information about OESS BC4 #ad


Similar products

American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size #ad
214F2 Karter Scientific Extension Lab Clamp 3 Prong Single Adjust 10-90mm Jaw #ad
OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip #ad
OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head Large Grip Adjustment Range to 3.6" Rod Length 7" #ad
United Scientific SSB6X9 Support Stand with Rod, 9" Base Length x 6" Base Width #ad
EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs (Opens to 90mm in Dia.) with Boss Head #ad
Lab Clamp 3 Prong Finger Style Rubber-Coated Large Grip Adjustment Range to 3.6" Rod Length 7" #ad
Support Stand 8" x 5" Coated Base Size - 24" Corrosion Resistant Rod - Cork Lined Burette Clamp with Boss Head, Retort Clamp PVC Coated 3 Prongs and Retort Ring (2.5" Dia) #ad
OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip #ad
Dow Corning Vacuum Lubricant 5.3oz Tube #ad


Dow Corning Vacuum Lubricant 5.3oz Tube

#ad
#ad
Dow Corning 77472132287 #ad - Maximum width of Jaw opening is 90mm. Can mount vertical or horizontal -- rotates on clamp. 3 finger clamp accepts rods up to 20 mm. Blue powder coated support stand base 8" x 5. 25". Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Covered jaws for protection and grip. Strong die-cast construction.

Dow Corning Vacuum Lubricant 5.3oz Tube #ad - The rods are nickel plated steel and are threaded to fit the base. United Scientific Supplies. Designed for sealing and lubricating vacuum and pressure systems. Base: 6" length by 4" width; rod: 5/16" diameter by 18" length. Give our product a try by ordering today. Strong and dependable support. Sold as 4pcs lab stand clamp Holder Boss Head Aluminium Alloy Body Right Angle Clips.

Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. Sold as 1 pcs 360 degrees swivels 3 finger lab clamp. Attaches to rods up to 15 mm in diameter.

More information about Dow Corning 77472132287 #ad


Similar products

Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C #ad
Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2 #ad
Laboratory Grade Metalware Set - Support Stand (8" x 5"), 12mm Dia. Rod (24" L), Cork Lined Burette Clamp with Boss Head and Retort Ring (2.5" Dia) #ad
EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs (Opens to 90mm in Dia.) with Boss Head #ad
StonyLab Thermometer Inlet Adapter with 24/40 Inner Joint, 80mm Height, for Distillation Apparatus #ad
Thermometer Adapter Inlet Adapter, 24/40 Inner Joint, 90mm Height, 3.3 Borosilicate Glass, Heavy Duty Reusable, for Distillation Apparatus #ad
Robinair 13204 Premium High Vacuum Pump Oil - 4- one gallon jugs #ad
OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip #ad
Mophorn Heating Mantle 1000ml Heating Mantle 350W Heating Mantle Magnetic Stirrer 0-1400 RPM Lab Heating Mantle for Liquid Heating #ad
JB Industries DVO-24 Bottle of Black Gold Vacuum Pump Oil, 1 gallon - GIDDS-2463009 #ad

Comments are currently closed.