NamsoloAll deals on one page

Starrett 18C Automatic Center Punch Heavy-Duty With Adjustable Stroke, 5-1/4″ Length, 11/16″ Diameter


STAKF 18C - The L. S. The company, founded in 1880, is headquartered in Athol, MA. Capable of striking a heavier blow than standard automatic center punch. It has an adjustable stroke, which can be set by turning the knurled cap and is regulated by spring tension for uniform dimple size at every setting. Heavy-duty automatic center punch with 5-1/4" length and 11/16" diameter punches a starter dimple without the need for a hammer.

The punch is made from hardened and tempered steel components that provide wear resistance and strength. Center punches make small dimple marks in a workpiece to help guide a drill bit. The point can be removed for replacement or sharpening. The starrett 18c heavy-duty automatic center punch with adjustable stroke is 5-1/4" long with a 11/16" 17 mm diameter for creating a starter dimple without the need for a hammer.

Starrett 18C Automatic Center Punch Heavy-Duty With Adjustable Stroke, 5-1/4" Length, 11/16" Diameter - This heavy-duty model is capable of striking a heavier blow than the Starrett 18A and 18AA automatic center punches. Manual center punches have a metal shank with a point and are typically tapped with a ball-peen hammer to mark the material. Hardened and tempered steel components provide wear resistance and strength.

. Stroke impact can be set by turning knurled cap. It has a round handle that is knurled for grip.

More information about STAKF 18C

Starrett 117C Center Punch With Round Shank, 4" Length, 1/8" Tapered Point Diameter


Starrett 117C - The starrett 117c center punch with round shank is 4" long and has a 1/8" 3 mm diameter tapered point. Hardened and tempered steel provides wear resistance and strength. Automatic center punches have an internal spring mechanism that enables them to mark the material without using a hammer, leaving one hand free for steadying the work.

The punch is made from hardened and tempered steel, which provides wear resistance and strength. The round shank is knurled for grip. Manual center punches have a metal shank with a point and are typically tapped with a ball-peen hammer to mark the material. Center punch with 4" length and 1/8" diameter tapered point makes a starter dimple to guide a drill bit.

Starrett 117C Center Punch With Round Shank, 4" Length, 1/8" Tapered Point Diameter - Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The L. S. The company, founded in 1880, is headquartered in Athol, MA. Round shank is knurled for grip. Center punches make small dimple marks in a workpiece to help guide a drill bit.

More information about Starrett 117C


Similar products

Starrett 816A Prick Punch, 4" Length, 5/64" Tapered Point Diameter
Starrett 18C Automatic Center Punch Heavy-Duty With Adjustable Stroke, 5-1/4" Length, 11/16" Diameter
Starrett 70A Pocket Scriber With Hardened Steel Point, 2-3/8" Point Length, 1/4" Handle Diameter
Starrett 70B Pocket Scriber With Hardened Steel Point, 2-7/8" Point Length, 3/8" Handle Diameter
Starrett 117AA Center Punch With Round Shank, 3" Length, 1/16" Tapered Point Diameter
Starrett 117E Center Punch With Round Shank, 5" Length, 1/4" Tapered Point Diameter
Mayhew Select 89082 Punch Set, 3-Piece
Neiko 02638A 5" Automatic Center Hole Punch | Adjustable Impact
Forney 20857 Tap Magic Cutting Fluid, 4 oz
IMT Tungsten Carbide Tip Scriber 2 Pack, Aluminium Etching Engraving Pen with Clip and Magnet for Glass/Ceramics/Metal Sheet, Extra 2 Free Replacement Marking Point


Malco A50 USA Made Carbide Tipped Scribe


Malco A50 - Hardened and tempered steel provides wear resistance and strength. Center punch with 4" length and 1/8" diameter tapered point makes a starter dimple to guide a drill bit. Pocket clip. Solid carbide tip for scribing fine lines on hardened steel as well as glass, ceramics, plastics or sheet metal. Carbide tip assures long service.

Replaceable tip. Round shank is knurled for grip. Durable design.

More information about Malco A50


Similar products

Malco A50R USA Made Carbide Scriber Replacement Tip
Starrett 18C Automatic Center Punch Heavy-Duty With Adjustable Stroke, 5-1/4" Length, 11/16" Diameter
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz)
MALCO PRODUCTS Sheet Metal Scribe
Markal 96270 Pro Holder & Starter Lead, Blue
Malco A60 USA Made Sheet Metal Scribe
Starrett 70A Pocket Scriber With Hardened Steel Point, 2-3/8" Point Length, 1/4" Handle Diameter
IMT Tungsten Carbide Tip Scriber 6 Pack, Aluminium Etching Engraving Pen with Clip and Magnet for Glass/Ceramics/Metal Sheet
Starrett 117C Center Punch With Round Shank, 4" Length, 1/8" Tapered Point Diameter
Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide


Starrett 70B Pocket Scriber With Hardened Steel Point, 2-7/8" Point Length, 3/8" Handle Diameter


Starrett 70B - Price for: each replaceable tip: yes includes: - threaded points: no finish: polished point type: straight handle material: Steel Handle Dia. The hexagon-shaped head prevents rolling. Round shank is knurled for grip. The scriber point is steel, properly hardened and finely tapered so that the location of the point is not obscured.

Center punch with 4" length and 1/8" diameter tapered point makes a starter dimple to guide a drill bit. Hardened and tempered steel provides wear resistance and strength. Durable design. In. 3/8 item: pocket scriber head: Hexagon Handle: Knurled Chuck Overall Length In. 6 magnet end: no tip material: Hardened Steel Country of Origin subject to change: United States.

Starrett 70B Pocket Scriber With Hardened Steel Point, 2-7/8" Point Length, 3/8" Handle Diameter - Replaceable tip. Pocket clip. The handle is of steel, knurled, and nickel plated. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. Carbide tip assures long service.

More information about Starrett 70B


Similar products

Starrett 70A Pocket Scriber With Hardened Steel Point, 2-3/8" Point Length, 1/4" Handle Diameter
Starrett 18C Automatic Center Punch Heavy-Duty With Adjustable Stroke, 5-1/4" Length, 11/16" Diameter
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz)
Starrett 117C Center Punch With Round Shank, 4" Length, 1/8" Tapered Point Diameter
Starrett S117PC Set of 5 Center Punches, 1/16", 5/64”, 3/32”, 1/8”, 5/32" Diameters, in Plastic Case
Starrett 1620 Tool and Instrument Oil, 4 fl.oz
Starrett C604RE-6 Spring Tempered Steel Rule With Inch Graduations, 6" Length, 3/4" Width, 3/64" Thickness
Blue, 8 oz. Can, Brush In Cap - Dykem Layout Fluid (1 Each)
Starrett 816A Prick Punch, 4" Length, 5/64" Tapered Point Diameter
Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide


Starrett 819 Hinge-Locating Automatic Center Punch With Adjustable Stroke, 5" Length, 5/8" Diameter


Starrett 819 - In. 3/8 item: pocket scriber head: Hexagon Handle: Knurled Chuck Overall Length In. 6 magnet end: no tip material: Hardened Steel Country of Origin subject to change: United States. Durable design. Carbide tip assures long service. This automatic centering punch combines with lightweight aluminum punch with an exclusive self centering locating sleeve that automatically centers starter holes for screws.

Hardened and tempered steel provides wear resistance and strength. Punch can be adjusted for striking light or heavy impressions by turning the knurled cap. Point is easily removed for replacement or resharpening. Price for: each replaceable tip: yes includes: - threaded points: no finish: polished point type: straight handle material: Steel Handle Dia.

Starrett 819 Hinge-Locating Automatic Center Punch With Adjustable Stroke, 5" Length, 5/8" Diameter - Replaceable tip. Eliminates the risk of drilling off center, causing screws to pull hinges or hardware off center. Pocket clip. Round shank is knurled for grip. To draw hinges, etc. Sideways, tilt the punch slightly in the opposite direction.

More information about Starrett 819


Similar products

Starrett 18C Automatic Center Punch Heavy-Duty With Adjustable Stroke, 5-1/4" Length, 11/16" Diameter
Clauss Hot Forged Carbon Steel Shears, 8" Bent
Bosch Clic-Change 3-Piece Self-Centering Drill Bit Assortment CC2430
Set of 3 Snappy Hinge Bits - 5/64", 7/64", 9/64" Spring Loaded Self Centering. Made In The USA.
Sandflex Sanding Block - 3 Pack
Starrett 818 Automatic Center Punch With Adjustable Stroke, 5" Length, 5/8" Diameter
Thor - 712R Soft And Hard Faced Hammer Wood Handle 650G
Norton 06038 Premium Micro Fiber Cleaning Cloth, 16-Inch x 16-Inch
Starrett 70B Pocket Scriber With Hardened Steel Point, 2-7/8" Point Length, 3/8" Handle Diameter
General Tools 806 Jiffy Centering Punch


Starrett 70A Pocket Scriber With Hardened Steel Point, 2-3/8" Point Length, 1/4" Handle Diameter


Starrett 70A - Round shank is knurled for grip. 681-50323 features: -Knurled chuck holds scriber firmly. Carbide tip assures long service. Price for: each replaceable tip: yes includes: - threaded points: no finish: polished point type: straight handle material: Steel Handle Dia. Knurled and nickel plated steel handle. Pocket clip.

. Center punch with 4" length and 1/8" diameter tapered point makes a starter dimple to guide a drill bit. In. 3/8 item: pocket scriber head: Hexagon Handle: Knurled Chuck Overall Length In. 6 magnet end: no tip material: Hardened Steel Country of Origin subject to change: United States. Product Type: -Scribers.

Starrett 70A Pocket Scriber With Hardened Steel Point, 2-3/8" Point Length, 1/4" Handle Diameter - Hardened and tempered steel provides wear resistance and strength. Point can be reversed, telescoped into handle and locked by the chuck, when not in use. Punch can be adjusted for striking light or heavy impressions by turning the knurled cap. Point is easily removed for replacement or resharpening. Durable design.

Hexagon head prevents rolling. Handle is of steel, knurled, and nickel plated.

More information about Starrett 70A


Similar products

Starrett 70B Pocket Scriber With Hardened Steel Point, 2-7/8" Point Length, 3/8" Handle Diameter
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz)
Starrett 816A Prick Punch, 4" Length, 5/64" Tapered Point Diameter
Starrett 117C Center Punch With Round Shank, 4" Length, 1/8" Tapered Point Diameter
Starrett 18C Automatic Center Punch Heavy-Duty With Adjustable Stroke, 5-1/4" Length, 11/16" Diameter
Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Body Length
Starrett 277-6 6" Toolmakers' Spring-Type Divider With Round Legs And Solid Nut
Dykem 04968 Red Layout Fluid - 8 oz Brush-In-Cap Bottle - 80496 [PRICE is per EACH]
Red, 4 oz. Can, Brush In Cap - Dykem Layout Fluid (1 Each)
BL-123 Pair of 1" x 2" x 3" Precision Steel 1-2-3 Blocks


Starrett S565WB Drive Pin Punch 8-Piece Set, 1/16"-5/16" Pin Diameters, 4" Overall Length, In Plastic Case


Starrett S565WB - Eliminates the risk of drilling off center, causing screws to pull hinges or hardware off center. Durable design. Round shank is knurled for grip. Comes with round red plastic case for storage. Hexagon head prevents rolling. Price for: each replaceable tip: yes includes: - threaded points: no finish: polished point type: straight handle material: Steel Handle Dia.

The set comes with a round red plastic case for storage. Point is easily removed for replacement or resharpening. Set of eight drive pin punches with 4" overall length and 1/16", 5/32", 7/32", 1/4", 3/16", 1/8", 3/32", and 5/16" pin diameters for pushing pins and rivets into or out of a workpiece. Hardened and tempered steel provides wear resistance and strength.

Starrett S565WB Drive Pin Punch 8-Piece Set, 1/16"-5/16" Pin Diameters, 4" Overall Length, In Plastic Case - Pin punches are used to insert or knock out rivets and pins in assemblies. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. Punch can be adjusted for striking light or heavy impressions by turning the knurled cap. Replaceable tip. In. 3/8 item: pocket scriber head: Hexagon Handle: Knurled Chuck Overall Length In.

6 magnet end: no tip material: Hardened Steel Country of Origin subject to change: United States.

More information about Starrett S565WB


Similar products

Starrett S248 Extended Length Drive Pin Punch, 1/8"-3/8" Pin Diameters, 8" Overall Length, 3-1/2" Pin Length Pack of 5 in Starrett Red Cardboard Box
Starrett SB565Z Brass Drive Pin Punches Set, 8 Pieces
Grace USA - 8 Ounce Delrin Tipped Brass Hammer - 8DT -Gunsmithing - Hammers - 8 ounce - Gunsmith Tools & Accessories
Starrett S264WB Set of 7 Center Punches in Round Plastic Box
Wheeler Universal Bench Block with Non-Marring Construction and Multiple Uses for Pistols, Gunsmithing and Maintenance
Grace USA - Steel Roll Spring Punch Set - RS7 - Gunsmithing - Steel Punches - 7 piece - Gunsmith Tools & Accessories
Lyman Brass Tapper Hammer
Starrett 565A 4" Overall Length, 9/16" Pin Length, 1/16" Pin Diameter, Drive Pin Punch
Grace USA - Roll Spring (Pin) Holder Set - RSH-5 - Gunsmithing - Roll Pin Holders - 5piece - Gunsmith Tools & Accessories
Grace USA - SHORT Roll Steel Spring Punch Set - SRS7 - Gunsmithing - Steel Punches - 7 piece -Gunsmith Tools & Accessories


Starrett 816A Prick Punch, 4" Length, 5/64" Tapered Point Diameter


Starrett 816A - Handle is of steel, knurled, and nickel plated. Set of eight drive pin punches with 4" overall length and 1/16", 5/32", 1/8", 3/16", 1/4", 7/32", 3/32", and 5/16" pin diameters for pushing pins and rivets into or out of a workpiece. Hardened and tempered steel provides wear resistance and strength. The punch has a tempered steel shank for strength and a hardened steel point for wear resistance.

The shank is round and knurled for grip. Center and prick punches are used to make a dimple mark in materials to guide a drill bit. Manual punch hand tools have a metal shank and a shaped or flat point that is typically tapped with a ball-peen hammer to make a pre-drilling indent. The L. S. Scriber point is steel, properly hardened.

Starrett 816A Prick Punch, 4" Length, 5/64" Tapered Point Diameter - Eliminates the risk of drilling off center, causing screws to pull hinges or hardware off center. In. 3/8 item: pocket scriber head: Hexagon Handle: Knurled Chuck Overall Length In. 6 magnet end: no tip material: Hardened Steel Country of Origin subject to change: United States. The point is sharp for precise placement of a drill bit.

Round shank is knurled for grip.

More information about Starrett 816A


Similar products

Starrett 117C Center Punch With Round Shank, 4" Length, 1/8" Tapered Point Diameter
Starrett 70A Pocket Scriber With Hardened Steel Point, 2-3/8" Point Length, 1/4" Handle Diameter
Starrett 816B Prick Punch, 4" Length, 1/8" Tapered Point Diameter
Starrett 264E Center Punch With Square Shank, 4-1/4" Length, 5/32" Tapered Point Diameter, 3/8" Square Thickness
Starrett 117E Center Punch With Round Shank, 5" Length, 1/4" Tapered Point Diameter
Starrett 70B Pocket Scriber With Hardened Steel Point, 2-7/8" Point Length, 3/8" Handle Diameter
Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide
Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET
IMT Tungsten Carbide Tip Scriber 2 Pack, Aluminium Etching Engraving Pen with Clip and Magnet for Glass/Ceramics/Metal Sheet, Extra 2 Free Replacement Marking Point
Starrett 117AA Center Punch With Round Shank, 3" Length, 1/16" Tapered Point Diameter


5/32" Square Shank Diameter, 2" Body Length - 3/16" Tap Size, 1/16" - Starrett 93A T-Handle Tap Wrench, 1/16"


Starrett 93A - Round shank is knurled for grip. Punch can be adjusted for striking light or heavy impressions by turning the knurled cap. Hexagon head prevents rolling. Designed to hold square shanks. Handle is of steel, knurled, and nickel plated. Hardened and tempered steel provides wear resistance and strength. Price for: each replaceable tip: yes includes: - threaded points: no finish: polished point type: straight handle material: Steel Handle Dia.

Heat treated. Fits tap sizes 1/16-Inch - 3/16-Inch. Center punch with 4" length and 1/8" diameter tapered point makes a starter dimple to guide a drill bit. Point is hardened steel for wear resistance. Eliminates the risk of drilling off center, causing screws to pull hinges or hardware off center. Product Type: -Wrenches.

5/32" Square Shank Diameter, 2" Body Length - 3/16" Tap Size, 1/16" - Starrett 93A T-Handle Tap Wrench, 1/16" - Prick punch with 5/64" diameter tapered point makes a starter dimple to guide a drill bit. Body is centered for use on lathe centers or upright drilling machines to start tap straight. Dimensions: Overall Product Weight: -016 pounds. Replaceable tip.

More information about Starrett 93A


Similar products

Starrett 93C T-Handle Tap Wrench, 1/4" - 1/2" Tap Size
Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide
Starrett 91B Tap Wrench, 3/16" - 1/2" Tap Size, 5/32" - 9/32" Square Shank Diameter, 9" Body Length
Starrett 91A Tap Wrench, 1/16" - 1/4" Tap Size, 3/32" - 5/32" Square Shank Diameter, 6" Body Length
Starrett 174 Tap Wrench, No. 0-14 Tap Size, 1/4" Square Shank Diameter, 3-5/8" Body Length
Starrett 827A Edge Finders, Single End, 0.375" Body Diameter, 0.2" Contact Diameter
Starrett 70A Pocket Scriber With Hardened Steel Point, 2-3/8" Point Length, 1/4" Handle Diameter
Starrett 91C Tap Wrench, 1/4" - 5/8" Tap Size, 5/32" - 3/8" Square Shank Diameter, 12" Body Length
Mitutoyo 050101, Edge Finder, 3/8" Dia. Shank, .200" Dia. Tip
Starrett 1620 Tool and Instrument Oil, 4 fl.oz


Forney 20857 Tap Magic Cutting Fluid, 4 oz


Forney Industries 20857 - Set of eight drive pin punches with 4" overall length and 1/16", 5/32", 7/32", 1/8", 1/4", 3/16", 3/32", and 5/16" pin diameters for pushing pins and rivets into or out of a workpiece. Hardened and tempered steel provides wear resistance and strength. Carbide tip assures long service. Punch can be adjusted for striking light or heavy impressions by turning the knurled cap.

Scriber point is steel, properly hardened. Shank is tempered steel for strength. Price for: each replaceable tip: yes includes: - threaded points: no finish: polished point type: straight handle material: Steel Handle Dia. Insert extractor into a pre-drilled hole. Point is hardened steel for wear resistance. Broken part is backed out with a wrench.

Forney 20857 Tap Magic Cutting Fluid, 4 oz - Comes with round red plastic case for storage. In. 3/8 item: pocket scriber head: Hexagon Handle: Knurled Chuck Overall Length In. 6 magnet end: no tip material: Hardened Steel Country of Origin subject to change: United States. 0 Fits tap sizes 1/16-Inch - 3/16-Inch.

More information about Forney Industries 20857


Similar products

Neiko 02638A 5" Automatic Center Hole Punch | Adjustable Impact
Best Choice 40-Piece Tap and Die Set - SAE Inch Sizes | Essential Threading Tool with Storage Case
Drill Doctor DA31325GF 100 Grit Sharpening Wheel
Best Choice 40-Piece Tap and Die Set - Metric Sizes | Essential Threading Tool with Storage Case
Drill Doctor 750X Drill Bit Sharpener for High-Speed Steel, Masonry, Carbide, Cobalt, TiN-coated Drill Bits, with Adjustable Angles from 115° to 140°, Sharpens 3/32in – 3/4in Drill Bits
Irwin Tools Drill Press Vise, 4", 226340
Muzerdo 86 Piece Tap and Die Set Bearing Steel Sae and Metric Tools, Titanium Coated with Metal Carrying Case
GearWrench 75PC 3887 Ratcheting Tap and Die Drive Tool Set SAE/Metric
CO-Z 5pcs Hss Cobalt Multiple Hole 50 Sizes Step Drill Bit Set with Aluminum Case
Bosch BDT11S 11Piece Tap & Die Set


Starrett S117PC Set of 5 Center Punches, 1/16", 5/64”, 3/32”, 1/8”, 5/32" Diameters, in Plastic Case


STAKF S117PC - Center punches make small dimple marks in a workpiece to help guide a drill bit. Eliminates the risk of drilling off center, causing screws to pull hinges or hardware off center. Provides a sharp point for precise placement. Shank is tempered steel for strength. Punch can be adjusted for striking light or heavy impressions by turning the knurled cap.

Round shank is knurled for grip. Fits tap sizes 1/16-Inch - 3/16-Inch. Durable design. Body is centered. Heat treated. Point is easily removed for replacement or resharpening. Each punch is made from hardened and tempered steel, which provides wear resistance and strength. Replaceable tip. Hardened and tempered steel provides wear resistance and strength.

Starrett S117PC Set of 5 Center Punches, 1/16", 5/64”, 3/32”, 1/8”, 5/32" Diameters, in Plastic Case - The round shanks are knurled for grip. The L. S. Pocket clip. Prick punch with 5/64" diameter tapered point makes a starter dimple to guide a drill bit.

More information about STAKF S117PC


Similar products

Starrett S248 Extended Length Drive Pin Punch, 1/8"-3/8" Pin Diameters, 8" Overall Length, 3-1/2" Pin Length Pack of 5 in Starrett Red Cardboard Box
Starrett 18C Automatic Center Punch Heavy-Duty With Adjustable Stroke, 5-1/4" Length, 11/16" Diameter
Starrett 70B Pocket Scriber With Hardened Steel Point, 2-7/8" Point Length, 3/8" Handle Diameter
Starrett S565WB Drive Pin Punch 8-Piece Set, 1/16"-5/16" Pin Diameters, 4" Overall Length, In Plastic Case
Starrett S565PC Drive Pin Punch Set (8 Pieces)
Starrett 1620 Tool and Instrument Oil, 4 fl.oz
Starrett 70A Pocket Scriber With Hardened Steel Point, 2-3/8" Point Length, 1/4" Handle Diameter
Starrett 93A T-Handle Tap Wrench, 1/16" - 3/16" Tap Size, 1/16" - 5/32" Square Shank Diameter, 2" Body Length
Starrett 117E Center Punch With Round Shank, 5" Length, 1/4" Tapered Point Diameter
Starrett 93C T-Handle Tap Wrench, 1/4" - 1/2" Tap Size

Comments are currently closed.